Subcommittee A01.10 on Stainless and Alloy Steel Tubular Products
Matching Standards Under the Jurisdiction of A01.10 by Status
- A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
- -See also WK94908 proposed Reapproval
- A632-19 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
- -See also WK94368 proposed Reapproval
- A209/A209M-03(2022) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
- A213/A213M-24 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- -See also WK95170 proposed Revision
- -See also WK88603 proposed Revision
- A249/A249M-24ae1 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
- -See also WK93416 proposed Revision
- A269/A269M-24 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
- -See also WK88606 proposed Revision
- A333/A333M-24 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
- A334/A334M-04a(2021) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
- -See also WK94905 proposed Revision
- A790/A790M-24 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
- A268/A268M-24 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
- A270/A270M-24 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
- A335/A335M-24b Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
- A369/A369M-24 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
- A376/A376M-22 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
- A511/A511M-21a Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
- -See also WK94052 proposed Revision
- A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
- -See also WK95068 proposed Revision
- -See also WK92726 proposed Revision
- -See also WK78042 proposed Revision
- -See also WK86405 proposed Revision
- A688/A688M-24 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
- A778/A778M-24a Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
- A803/A803M-16(2021) Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
- -See also WK94906 proposed Reapproval
- A813/A813M-24 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
- A999/A999M-23 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
- -See also WK91675 proposed Revision
- A1053/A1053M-12(2022) Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
- A1047/A1047M-05(2023) Standard Test Method for Pneumatic Leak Testing of Tubing
- A409/A409M-24 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
- A789/A789M-24 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
- A908-24 Standard Specification for Stainless Steel Needle Tubing
- -See also WK88722 proposed Withdrawal
- A1015-01(2024) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
- A1127/A1127M-23 Standard Specification for Stainless Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP) or Built-Up Rounded Corner Square, Rectangular, and Special Shape Structural Tube
- A928/A928M-14(2021) Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
- -See also WK94907 proposed Reapproval
- A1098/A1098M-18(2022) Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
- A1016/A1016M-24a Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
- A1119/A1119M-23a Standard Specification for Welded Partially Corrugated Stainless Steel Tube for Potable Water and General Service
- WK95792 Cold-Formed Welded Stainless Steel Structural Tubing in Rounds and Shapes.
- A851-96 Standard Specification for High-Frequency Induction Welded, Unannealed, Austenitic Steel Condenser Tubes (Withdrawn 2002)
- A954-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe (Withdrawn 2005)
- A0250_A0250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes (Withdrawn 2017)
- A826/A826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)
- A771/A771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components (Withdrawn 2004)
- A250/A250M-05(2014) Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes (Withdrawn 2017)
- A814/A814M-15(2019) Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe (Withdrawn 2024)
- A953-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing (Withdrawn 2005)
- A943/A943M-01(2019) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes (Withdrawn 2024)
- A949/A949M-01(2019) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe (Withdrawn 2024)